FM 1100°C – 1200°C ELECTRIC FURNACES
All purpose laboratory and factory furnaces.
SPECIFICATION FM
Furnaces include four standard versions, all of them sharing some basic features (identified
by a small square) and specific features for the different versions (identified by a small
circle)
 |
Floating temperature control with proportional force instant parameter display – Thermocouples |
|
High efficiency thermal insulation resulting from the combination of silica-alumina refractories and ceramic fibres, which is responsible for lower power consumption and quick heating without affecting the toughness of the coating through protracted use. |
|
Alloy Kanthal A1 resistors |
|
Corrosion proof wrought steel frame |
|
Automatic disconnection of the heating circuit when opening the door |
 |
Screened off resistors available in the FM 76 – FM 76S – FM 76H versions |
|
Radiant resistors FM 77 type |
|
Rear natural draught fume release pipes available in the FM 76 – FM 76h – FM 77 versions |
|
Rear flue pipe hood connected to an extraction fan equipped with manual or automatic control, FM 76S type. |
|
Refractory steel hearth available in all versions apart from FM 76H |
Optional features:
- Digital temperature display
- Time setting device
- Timed temperature cycles
- Automatic thermal cycle setting
220V single phase
220V three-phase
380V three-phase with neutral
Heating time: 70 minutes
Power consumption at 1000°C: 0,8 KWh
| Model | A mm. | B mm. | C mm. | a mm. | b mm. | c mm. | Weight Kg | Power Kw | Temp. °C |
| FM-74 | 350 | 570 | 520 | 170 | 110 | 170 | 40 | 2 | 1100 |
| FM-76 | 660 | 440 | 560 | 210 | 150 | 300 | 60 | 3 | 1100 |
| FM-76H | 660 | 440 | 560 | 210 | 150 | 300 | 75 | 3 | 1200 |
| FM-76S | 660 | 520 | 700 | 210 | 150 | 300 | 66 | 3 | 1100 |
| FM-77 | 800 | 580 | 900 | 250 | 190 | 500 | 90 | 7 | 1100 |
One-year warranty against manufacturing defects.
Data and specifications subject to updating.